Raw images from the camera will be in whatever mode your camera is set to (normally either RAW or JPEG). The FITS images are transferred as Bayered frames and it is the clients responsiblity to debayer the image upon reception. Furthermore, FITS images can be larger in size compared to native formats such as RAW/JPEG. This can reduce latency and CPU usage on the server. CR2, NEF.etc) without converting to FITS first. Images from the camera can be transferred in native (e.g.
Image Formatīy default, the transfer format is set to FITS. Turn off auto noise reduction in camera settings (Custom Functions #3). Canon 350D) can make exposure times take twice their expected duration. Before you connect, the port field must be set to DSUSB.Īuto Noise Reduction in some camera models (e.g.
#Astrodslr xti driver
Nikon) as only the GPhoto generic driver would work with external shutter release cables.Īdditionaly, users may employ DSUSB/DSUSB2 from Shoestring Astronomy in order to control the shutter. When using external shutter release cable, you must use the GPhoto generic driver and not a camera-specific driver (e.g. If your camera uses an external shutter release cable, make sure to indicate the port of the shutter release USB cable (usually /dev/ttyUSB0) in the Main Control tab of the GPhoto driver before connecting to the camera. fits.fz compressed file which can save up to 70% of the image size. The compress only applies to images captured in FITS format and it would produce a. If compression is disabled, network load is increased, but CPU load is decreased. If compression is enabled, network load is reduced (If your camera is not remote, network load is negligible), but CPU load is increased. The compression option enables you to balance between network load vs. The gphoto driver provides you with an option to compress incoming streams and images.
#Astrodslr xti install
Under Ubuntu, you can install the driver via: sudo add-apt-repository ppa:mutlaqja/ppa sudo apt-get update sudo apt-get install indi-gphoto Features Compression
#Astrodslr xti drivers
Your client should provide you with a list of drivers you can connect with.
On the first time you use the driver, you must set the required CCD Information specific to your DSLR model. two Canon cameras) and driver name would reflect the detected camera name.īesides the differences outlined above, the drivers are idential in every other way. These drivers can connect to multiple cameras of the same type (i.e. The driver name is always "GPhoto CCD" and it can connect only to a single camera at a time.
INDI should be able to support any camera supported by libgphoto2, including Canon, Nikon, Pentax, Sony, & Fuji DSLRs. Make sure the OS does not mount the camera as a disk-drive as this would prevent the driver from communicating with the camera. INDI can control most cameras supported by GPhoto library using the INDI gphoto driver.
0 kommentar(er)
